Armacost Lighting
Electronic Power Supplies

Dimmable with Armacost Lighting 12V PWM dimmers

Electronic Power Supplies are available in 6, 15, 30, and 60 watt models. Larger output capacities can be special ordered. When dimming, use only Armacost Lighting 12V LED dimmers. Electronic power supplies are not compatible with 120V AC dimmers. For dimming with a Lutron dimmer, choose a dimmable magnetic power supply.

All electronic power supplies are either UL or ETL listed and conform to UL Standards 1310 and/or UL 8750, UL 60950-1. Certified to Canada CSA standards C22.2 No. 223-M91or 1-09.


Choose the right size or appropriate wattage output

The amount of power needed for your application is dependent on the watts required by your LED lighting. Read the installation guidelines provided with your LED lighting. For RibbonFlex Pro LED tape lighting, the power or watts required depends on the brightness model as determined by LED density (number of LEDs per meter), the length of the lighting being installed, and the design configuration for your application. Read the installation guidelines for the LED light product you are using and choose a power supply rated greater than your needs – you cannot overpower LED tape lighting.

30 Watt Power Supply

  • Assembled with a 24" (610mm) 12V DC output wire and terminal block connector for ease of connection Prewired with AC cord and plug for use with existing outlets
  • When end caps are removed, this power supply can also be direct wire installed through onboard terminal blocks
  • Use minimum 18 AWG rated cable or better to tie in with line voltage
  • For dry location use only (IP 20)
  • 120V AC, 50/60Hz input, 2.5A constant voltage output
  • Dimensions: 5-15/16" L x 1-5/8" W x 1-3/16" H
    (150.5mm L x 41mm W x 30.5mm H)
Download Installation Guidelines

60 Watt Power Supply

  • Assembled with a 24" (610mm) 12V DC output wire and terminal block connector for ease of connection
  • Prewired with AC cord and plug for use with existing outlets
  • When end caps are removed, power supply can also be direct wire installed through onboard terminal blocks
  • Use minimum 18 AWG rated cable or better to tie in with line voltage
  • For dry location use only (IP 20)
  • 120V AC, 50/60Hz input, 5.0A constant voltage output
  • Dimensions: 7-1/16" L x 2-3/8" W x 1-3/16" H
    (180mm L x 60mm W x 30mm H)
Download Installation Guidelines


6 Watt Power Supply

  • Assembled with a 12" (305mm) 12V DC output wire and terminal block connector for ease of connection
  • Prewired with AC cord and plug for use with existing outlets
  • When cover case is removed, power supply can also be direct wire installed through onboard terminal blocks
  • Use minimum 18 AWG rated cable or better to tie in with line voltage
  • For dry location use only (IP 20)
  • 100~120V AC, 50/60Hz input, 0.5A constant voltage output
  • Dimensions 2-11/16" L x 1-3/8" W x 13/16" H
    (68mm L x 35mm W x 20mm H)
Download Installation Guidelines

15 Watt Power Supply

  • Assembled with a 12" (305mm) 12V DC output wire and terminal block connector for ease of connection
  • Prewired with AC cord and plug for use with existing outlets
  • For dry location use only (IP 20)
  • 120V AC, 50/60Hz input, 1.25A constant voltage output
  • Dimensions: 4-3/4" L x 1-3/4" W x 1-1/16" H
    (121mm L x 46mm W x 18mm )
Download Installation Guidelines